Asphalt Sealcoating
Sealcoating Southern Ontario properties is what we do best!
Welcome to Canadian Pavement Management Group. Our commitment is to extend the life and aesthetics of your parking lots through top-notch asphalt sealcoating services. With us, safeguarding your pavement investment becomes effortless and effective.
Sealcoating? Is it Necessary?
So, what exactly is asphalt sealcoating? It’s a preventive measure that involves applying a protective sealant over asphalt surfaces. This not only rejuvenates the appearance of your parking lots but also offers enhanced protection against water, oils, and UV damage.
The Benefits of Asphalt Sealing
In essence, sealing your parking lot is an investment in longevity and aesthetics. When considering asphalt protection, think of sealcoating as a shield against premature deterioration.
Asphalt sealer acts as a protective layer against the onslaught of UV rays, moisture, and chemical spills. It also seals tiny cracks, and prevents them from becoming bigger ones that are costlier to fix. Last but not least, it restores asphalt’s sleek, black sheen. It’s like your parking lot is new again.
The Best Time to Seal Asphalt in Southern Ontario
Like everything else, timing matters. The best season to apply sealcoat is during the warmer months, when the temperatures are consistent. Warmer temperatures and the lack of precipitation ensures proper curing of the sealant.
The Asphalt Sealcoating Process
- Surface preparation. Before sealcoating, the asphalt surface must be thoroughly cleaned. This usually involves sweeping to remove dirt, leaves, and debris. High-powered blowers are often used to remove any remaining dust.
Any holes, cracks, or damaged areas should be patched or filled prior to sealcoating.
-
Priming Oil Spots. Oil or gasoline spots can prevent sealcoating from adhering properly. Therefore, any oil spots are cleaned and then primed to ensure proper adhesion of the sealcoat.
-
Mixing the Sealcoat Material. Sealcoat materials come in concentrated forms and typically need to be mixed with water, sand, and additives according to the manufacturer’s recommendations. This mixture is prepared in a drum or tank.
- Application of the Sealcoat. The mixed sealcoat material is applied uniformly over the asphalt surface using squeegees or spray equipment. It’s crucial to ensure an even application without pooling or heavy spots.
Once applied, the first coat needs to dry thoroughly. The time required can vary based on environmental conditions but usually takes several hours.
Some surfaces may require a second coat for added protection and uniform appearance. If applied, it’s important to let the first coat dry completely before adding the second.
- Drying and Curing. After the final coat, the sealcoated surface must be allowed to cure for a specified period. This usually takes 24 to 48 hours, but the length of time depends on the product and conditions. During this time, the area should be kept free from vehicle and pedestrian traffic.
Whether through the meticulous application using a squeegee or deploying advanced sealcoating equipment, our process ensures a uniform coat and long-lasting results. With our expertise in pavement sealing, your asphalt surfaces will be in capable hands.
Take the next step!
If you own or manage a medium or large-scale business in the Southern Ontario area and prioritize the longevity of your premises, Canadian Pavement Management Group is your trusted partner. Contact us today for inquiries or to get a comprehensive estimate. Trust in our promise — durability and elegance, side by side.
